SANDBLAST NOZZLES
 
BLAST HOSE COUPLINGS
 
BLAST NOZZLE HOLDERS
 
SANDBLAST HOSES
 
AIR FILTER CORES
 
OTHER SANDBLAST ACCESSORIES
 
ABRASIVES
 
SANDBLAST NOZZLES
-> BORON CARBIDE BLAST NOZZLES -> BORON CARBIDE FLANGE & INITIAL NOZZLES
  A405-I


Zoom in


Zoom in
  


 Information
Part No    Model No   Bore dia              Length           
290900B   A405-6I     Ø6mm(15/64")     40.5mm( 1 19/32")             
290901B   A405-7I     Ø7mm(9/32")       40.5mm( 1 19/32")                
290902B   A405-8I     Ø8mm( 5/16")      40.5mm( 1 19/32")                
290903B   A405-9I     Ø9mm( 23/64")    40.5mm( 1 19/32")               
290904B   A405-10I   Ø10mm( 13/32")  40.5mm( 1 19/32")                  
290905B   A405-11I   Ø11mm(7/16")     40.5mm( 1 19/32")                 
290906B   A405-12I   Ø12mm( 15/32")  40.5mm( 1 19/32")                 
290907B   A405-13I   Ø13mm(1/2")       40.5mm( 1 19/32")                
290908B   A405-14I   Ø14mm( 9/16")    40.5mm( 1 19/32")                
290909B   A405-15I   Ø16mm( 19/32")  40.5mm( 1 19/32")  

 

DFBLAST "A405-I" Boron Carbide Initial Blast Nozzle for Flange Nozzle , aluminium jacket protect the boride core.  "A405-I " Initial  Nozzle can not be used independently. It should be used with flange nozzles.The Initial nozzle bridges the large diameter difference between hose and nozzle. It leads the abrasive flow into the nozzle orifice and reduce friction loss.  So the service life of sandblasting nozzle can be extended if it is used with lead-in nozzle.




Back
Tel:86-021-34511095 34511096   Fax:86-021-34511095-16
http://www.dfblast.com               Email:  info@dfblast.com 
Copyright © 2002-2005 DF Hardware & Electrical Co., Ltd All Rights Reserved.
无锡按摩