|
DFBLAST nylon nozzle holders provide minimal weight receptacle for the nozzles and helps reduce operator fatigue. Manufactured to fit outer over the the blast retaining screws provide additional holding power without penetrating the inner hose layer.To suit nozzles with 1-1/4" NPS or BSP and 50mm (2") contractor thread. Working temperature range: -40℃~+80℃ |
Model |
Specification |
NNH-0 |
3/4" fine thread, to fit hose O.D 28mm (1-1/8") |
NNH-3/4 |
1-1/4" fine thread, to fit hose O.D 34mm (1-5/16") |
NNH-1 |
1-1/4” fine thread, to fit hose O.D 38mm (1-1/2") |
NNH-2 |
1-1/4" fine thread, to fit hose O.D 48mm (1-7/8") |
NNH-3 |
1-1/4" fine thread, to fit hose O.D 55mm (2-3/16") |
NNH-3/4/50 |
2" contractor thread, to fit hose O.D 34mm (1-5/16") |
NNH-1/50 |
2" contractor thread, to fit hose O.D 38mm (1-1/2") |
NNH-2/50 |
2" contractor thread, to fit hose O.D 48mm (1-7/8") |
NNH-3/50 |
2" contractor thread, to fit hose O.D 55mm (2-3/16") | |
Nozzle washer |
RNW-1 |
To fit nozzle holder NNH-0, used with 13mm (1/2") entry, 3/4" thread nozzle. |
RNW-2 |
To fit nozzle holder NNH-3/4,NNH-1,NNH-2, NNH-3, used with 25mm (1")entry, 1-1/4" thread nozzle. |
RNW-25 |
To fit nozzle holder NNH-3/4/50, NNH-1/50, NNH-2/50, NNH-3/50, used with 25mm (1")entry, 2" thread nozzle. |
RNW-32 |
To fit nozzle holder NNH-3/4/50, NNH-1/50, NNH-2/50, NNH-3/50, used with 32mm (1-1/4") entry, 2" thread nozzle. | | | | |